Instructions

Modular system with both FDM and extrusion of emulsifiable materials (a.k.a a paste or gel printer).

• Max Build Volume: 225 x 200 x 200mm

• Your first print

• Prepare the machine
• Level the bed
• General slicer info
• Start a print
• Tips
• Errors

—

• Clean cylinders after each use! Not doing so will ruin them.
• While it is possible to print with food products, we do not recommend it, due to the difficulty of insuring sanitary conditions.
• Official Repetrel info page: http://hyrel3d.net/wiki/index.php/Repetrel
  • Check Prime & Unprime sections
• Head panel overrides (??)
  • Nozzle Ø: This should be set correctly (test to make sure it overrides the slic3r profile)
  • Layer Z in mm: this is not important, as it is overridden by G-code

• Plasticine
• Marzipan
• Bees wax

• Emo-25 - For emulsifiables at room temperature
• VOL-25 - For heated emulsifiables
• MK1-250 - for plastic filament