hyrel:start_a_print

Start a print

  1. Load in a 3D file
  2. Set the slicer profiles
  3. Click the big Process button & select Slice with Slic3r.
  4. When the G-code preview looks good, click Print
    1. Use Z fine adjust (Z+ = bed closer to nozzle, Z- = bed further away from nozzle)
    2. Use Kill Job when you want to stop the test.
  • hyrel/start_a_print.txt
  • Last modified: 2020/10/06 04:27
  • by formlab