This is an old revision of the document!
Hyrel
Modular system with both FDM and extrusion of emulsifiable materials.
- Max Build Volume:
225 x 200 x 200mm
Tutorial
Reference
Clean cylinders after each use! Not doing so will ruin them.
Material specific info
- Marzipan
Tool-head specific info
- VOL-25 - For heated emulsifiables
Tips
- Cylinders can be swapped out for larger volume prints.
- M0 x0 y200 (Pauses the print and brings the tool head forward so the current cylinder can be swapped out for a new one. When ready, press continue).
- Keep cylinders CLEAN. Dry material inside is the #1 problem.
- No air in cylinders. Air will make the material delivery spongy. Accurate control is impossible this way.
- manuals are at
Desktop > repetrel > Manuals
. Check theAccessories
folder for manuals about the toolheads. - Choosing another Slicer Profile
- Make sure you select first the project file (Main) and then the 3D object in the project window before choosing a new slicing profile. This is a quirk of the Repetrel software. Make sure to Add consistent notes to the slicer profiles, so you can notice them in the G-code preview (they are printed on top of the file). This makes it easier to see exactly which profile you selected
Disclaimer
- While it is possible to print with food products, we do not recommend it, due to the difficulty of insuring sanitary conditions.