isel_icv4030:isel_icv4030
This is an old revision of the document!
Table of Contents
Isel ICV 4030 - CNC milling machine
- Max Model Dimensions (X - Y):
29 x 35cm
Available material
| Material | Dimensions | Cost |
|---|---|---|
| Aluminum plate | 280x140x8mm | €9,20 per piece |
| Aluminum plate | 300x260x5mm | €10,60 per piece |
| square bar | 20x20mm | €0,20 per cm |
| square bar | 40x40mm | €0,40 per cm |
| square bar | 60x60mm | €0,80 per cm |
| rectangular bar | 80x30mm | €0,80 per cm |
| rectangular bar | 80x40mm | €1,00 per cm |
| rectangular bar | 150x15mm | €0,80 per cm |
| rectangular bar | 200x10mm | €0,60 per cm |
| rectangular bar | 200x20mm | €1,20 per cm |
Aluminum
Tested alloy: 6082 / ALMgSi1 Testas: data sheet
Messing
Tested alloy: CuZn 37
Milling tips
- Foam
- single flute
- down cut
- 3000mm/min and 18-24,000rpm depending on bit diameter
- use conventional milling
isel_icv4030/isel_icv4030.1736762634.txt.gz · Last modified: by formlab