Tips

This is an old revision of the document!

Cylinders can be combined for larger volume prints.
- M0 x0 y200 (Pauses the print and brings the tool head forward so the current cylinder can be swapped out for a new one. When ready, press continue).
Keep cylinders CLEAN. Dry material inside is the #1 problem.
No air in cylinders. Air will make the material delivery spongy. Accurate control is impossible this way.
manuals are at Desktop > repetrel > Manuals. Check the Accessories folder for manuals about the toolheads.
Choosing another Slicer Profile
- Make sure you select first the project file (Main) and then the 3D object in the project window before choosing a new slicing profile. This is a quirk of the Repetrel software. Make sure to Add consistent notes to the slicer profiles, so you can notice them in the G-code preview (they are printed on top of the file). This makes it easier to see exactly which profile you selected
Dialing in new material settings: https://madprinter.org/2016/07/05/dialing-in-material-settings/