ur10_robot_arm:drawing_with_the_ur10_v2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
ur10_robot_arm:drawing_with_the_ur10_v2 [2023/02/08 06:46] – formlabur10_robot_arm:drawing_with_the_ur10_v2 [2023/02/08 07:10] (current) – [Connect the computer to the robot] formlab
Line 37: Line 37:
  
   * Use an ethernet cable going over a switch. Connecting directly to the robot doesn't work.   * Use an ethernet cable going over a switch. Connecting directly to the robot doesn't work.
-  * If you use a laptop: Use the MiniDisplay to Ethernet adapter that is labeled Formlab. I had another one (the same model) fail, which is annoying to debug.+  * **Don't connect to the LAN of KASK.** The robot won't be able to connect to the network. Use a separate switch or remove all the connections except the one going to the robot and the computer. 
 +  * If you use a laptop: Use the MiniDisplay to Ethernet adapter that is labeled Formlab. I had another one fail (the same model), which is annoying to debug. 
 + 
 +  * IP address: 192.168.185.99 
 +  * Subnet masker: 0.0.0.0 
 +  * Default Gateway: 0.0.0.0 
 +  * Preferred DNS Server: 0.0.0.0 
 +  * Alternative DNS Server: 0.0.0.0
  
  
  • ur10_robot_arm/drawing_with_the_ur10_v2.txt
  • Last modified: 2023/02/08 07:10
  • by formlab