slicers:slicers

This is an old revision of the document!


Slicers


Use different slicer settings in the volume of a selected object.

Example: use a more dense infill in a specified area

  • Add the object you want to print.
  • Add the object you want to define the dense infill with (a cube could work just fine).
  • Change the size and position of the second object so it overlaps the first object at the desired location.
  • Select the second object. In the side bar, go to per model settings and select Modify settings for overlaps.
  • select infill mesh only
  • select the following settings:
    • Wall line count: 0
    • Top Layers: 0
    • Bottom Layers: 0
    • Infill Density: the desired value for your print


  • slicers/slicers.1596446383.txt.gz
  • Last modified: 2020/08/03 02:19
  • by formlab