projet_mjp_3600:projet_mjp_3600

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
projet_mjp_3600:projet_mjp_3600 [2020/05/25 01:55] formlabprojet_mjp_3600:projet_mjp_3600 [2021/01/26 01:46] (current) formlab
Line 2: Line 2:
 {{:projet_mjp_3600:pj3600_angle01-940_tn_web.png?nolink&200|}} {{:projet_mjp_3600:pj3600_angle01-940_tn_web.png?nolink&200|}}
  
-===== How much does it cost? =====+Multijetting 3D printer
  
-<code> +  * Max Build Volume: ''298 x 183 x 203mm'' 
-( build material cost + support material cost ) * material multiplier )+ 
 +---- 
 + 
 +=== How much does it cost? === 
 + 
 + 
 +  ( build material cost + support material cost ) * material multiplier )
   +   +
-( machine time (in hours) * machine time cost ) +  ( machine time (in hours) * machine time cost ) 
-</code>+ 
 +  * Build material cost: €515,70 per 2Kg 
 +  * Support material cost: €279,72 per 2Kg 
 +  * Material multiplier: 10% (build and support material * 1,1) 
 +  * Machine time cost: €0,55 per hour 
  
-  * build material cost: €515,70 per 2Kg +=== Design constraints === 
-  * support material cost: €279,72 per 2Kg +  * A hollow model needs a hole for the support material to drain out. Without a holethe software will fill the space with building material
-  * material multiplier: 10% (build and support material * 1,1) +
-  * machine time multiplier: €0,55 per hour+
  
 +=== Post production ===
 +  * Degrease object with IPA to increase adhesion for paint
 +  * Use a primer for UV protection
 +  * Spray paint
 +  * Colouring the volume of the object: immerse into a mixture of acetone (30%), water (70%) and fabric paint (experimental)
  • projet_mjp_3600/projet_mjp_3600.1590396931.txt.gz
  • Last modified: 2020/05/25 01:55
  • by formlab