projet_mjp_3600:projet_mjp_3600

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
projet_mjp_3600:projet_mjp_3600 [2019/06/05 05:01] formlabprojet_mjp_3600:projet_mjp_3600 [2021/01/26 01:46] (current) formlab
Line 1: Line 1:
 ====== Projet MJP 3600 ====== ====== Projet MJP 3600 ======
 {{:projet_mjp_3600:pj3600_angle01-940_tn_web.png?nolink&200|}} {{:projet_mjp_3600:pj3600_angle01-940_tn_web.png?nolink&200|}}
 +
 +Multijetting 3D printer
 +
 +  * Max Build Volume: ''298 x 183 x 203mm''
 +
 +----
 +
 +=== How much does it cost? ===
 +
 +
 +  ( build material cost + support material cost ) * material multiplier )
 +  +
 +  ( machine time (in hours) * machine time cost )
 +
 +  * Build material cost: €515,70 per 2Kg
 +  * Support material cost: €279,72 per 2Kg
 +  * Material multiplier: 10% (build and support material * 1,1)
 +  * Machine time cost: €0,55 per hour
 +
 +
 +=== Design constraints ===
 +  * A hollow model needs a hole for the support material to drain out. Without a hole, the software will fill the space with building material
 +
 +=== Post production ===
 +  * Degrease object with IPA to increase adhesion for paint
 +  * Use a primer for UV protection
 +  * Spray paint
 +  * Colouring the volume of the object: immerse into a mixture of acetone (30%), water (70%) and fabric paint (experimental)
  • projet_mjp_3600/projet_mjp_3600.1559736095.txt.gz
  • Last modified: 2019/06/05 05:01
  • by formlab