Differences

This shows you the differences between two versions of the page.

--- projet_mjp_3600:projet_mjp_3600 [2020/05/25 03:02] – formlab
+++ projet_mjp_3600:projet_mjp_3600 [2021/01/26 01:46] (current) – formlab
@@ Line 8: / Line 8: @@
 ----
-===== How much does it cost? =====
+=== How much does it cost? ===
-<code>
-( build material cost + support material cost ) * material multiplier )
+  ( build material cost + support material cost ) * material multiplier )
   +
-( machine time (in hours) * machine time cost )
+  ( machine time (in hours) * machine time cost )
-</code>
+  * Build material cost: €515,70 per 2Kg
+  * Support material cost: €279,72 per 2Kg
+  * Material multiplier: 10% (build and support material * 1,1)
+  * Machine time cost: €0,55 per hour
-  * build material cost: €515,70 per 2Kg
+=== Design constraints ===
-  * support material cost: €279,72 per 2Kg
+  * A hollow model needs a hole for the support material to drain out. Without a hole, the software will fill the space with building material
-  * material multiplier: 10% (build and support material * 1,1)
-  * machine time multiplier: €0,55 per hour
+=== Post production ===
+  * Degrease object with IPA to increase adhesion for paint
+  * Use a primer for UV protection
+  * Spray paint
+  * Colouring the volume of the object: immerse into a mixture of acetone (30%), water (70%) and fabric paint (experimental)