Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Fill holes ====== {{:3d_modeling:meshmixer-fill-01.jpg?|}} Go to menu 'Analysis' > Inspector. All holes and other errors will be indicated. Blue is easy to solve, red indicated problems might be more problematic to fix. {{:3d_modeling:meshmixer-fill-02.jpg|}} Set the mode to 'Flat Fill' to simply close the holes {{:3d_modeling:meshmixer-fill-03.jpg|}} Set the mode to 'Smooth Fill' to try following the geometry when filling the holes. 3d_modeling/fill_holes.txt Last modified: 2020/01/22 01:28by formlab