Differences

This shows you the differences between two versions of the page.

--- ultimaker_s5:ultimaker_s5 [2019/06/05 04:47] – created formlab
+++ ultimaker_s5:ultimaker_s5 [2025/01/13 02:02] (current) – [Ultimaker S5] formlab
@@ Line 1: / Line 1: @@
 ====== Ultimaker S5 ======
 {{:ultimaker_s5:ultimaker-s5.jpg?nolink&200|}}
+  * Max Build Volume: ''330 x 240 x 300mm''
+  * [[:Filament options]]
+[[https://www.formlab.schoolofarts.be/pricing|How much does FDM printing cost?]]
+----
+===== Maintenance =====
+==== Every 2 months ====
+  * [[https://ultimaker.com/en/resources/52604-clean-the-printer|Clean printer]]
+    * wash build plate with warm water
+    * heat up nozzles to 150°C and remove plastic stuck on the nozzle (with tweezers or a paper towel)
+    * clean Bowden tube by pushing a piece of sponge trough. Tight fit, and a new piece of sponge per tube.
+  * [[https://ultimaker.com/en/resources/52605-lubricate-the-axles|Lubricate axles]]
+    * clean all smooth axles with a paper towel
+    * one drop of Unilube on all smooth axles (also the two vertical ones). Move the print head and bed manually to distribute.
+==== Every 6 months ====
+  * [[https://ultimaker.com/en/resources/52606-check-for-play-on-the-axles|Check for play on axles]]
+  * [[https://ultimaker.com/en/resources/52607-check-the-tension-of-the-short-belts|Check tension of short belts]]
+  * [[https://ultimaker.com/en/resources/52609-check-for-debris-in-the-front-fan-of-the-print-head|Check for residue in front fan of print head]]
+  * [[https://ultimaker.com/en/resources/52611-check-the-quality-of-the-nozzle-cover|Check quality of silicone nozzle cover]]
+  * [[https://ultimaker.com/en/resources/52614-clean-the-print-cores|Clean print cores]]
+  * [[https://ultimaker.com/en/resources/52613-clean-the-feeders|Clean the feeders]]
+  * [[https://ultimaker.com/en/resources/52612-lubricate-the-z-screw-of-the-z-motor|Lubricate lead screw Z motor]]
+==== Yearly ====
+  * [[https://ultimaker.com/en/resources/52615-lubricate-the-feeder-gear|Lubricate the feeder gear]]
+  * [[https://ultimaker.com/en/resources/52616-replace-the-bowden-tubes|Replace Bowden tubes]]
+  * [[https://ultimaker.com/en/resources/52617-clean-the-system-fans|Clean the system fans]]
+  * [[https://ultimaker.com/en/resources/52618-lubricate-the-hinges|Lubricate the hinges]]