ultimaker_s5:ultimaker_s5

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
ultimaker_s5:ultimaker_s5 [2019/09/23 05:40] – [Every 2 months] formlabultimaker_s5:ultimaker_s5 [2020/06/23 04:11] (current) formlab
Line 1: Line 1:
 ====== Ultimaker S5 ====== ====== Ultimaker S5 ======
 {{:ultimaker_s5:ultimaker-s5.jpg?nolink&200|}} {{:ultimaker_s5:ultimaker-s5.jpg?nolink&200|}}
 +
 +
 +  * Max Build Volume: ''330 x 240 x 300mm''
 +  * [[:Filament options]]
 +
 +
 +[[:How much does FDM printing cost?]]
 +
 +
 +----
  
 ===== Maintenance ===== ===== Maintenance =====
Line 8: Line 18:
     * heat up nozzles to 150°C and remove plastic stuck on the nozzle (with tweezers or a paper towel)     * heat up nozzles to 150°C and remove plastic stuck on the nozzle (with tweezers or a paper towel)
     * clean Bowden tube by pushing a piece of sponge trough. Tight fit, and a new piece of sponge per tube.     * clean Bowden tube by pushing a piece of sponge trough. Tight fit, and a new piece of sponge per tube.
-  * [[https://ultimaker.com/en/resources/52605-lubricate-the-axles|Lubricate axles]] +  * [[https://ultimaker.com/en/resources/52605-lubricate-the-axles|Lubricate axles]] 
 +    * clean all smooth axles with a paper towel 
 +    * one drop of Unilube on all smooth axles (also the two vertical ones). Move the print head and bed manually to distribute.
  
  
 ==== Every 6 months ==== ==== Every 6 months ====
-  * [[https://ultimaker.com/en/resources/52605-check-for-play-on-axles|Check for play on axles]]+  * [[https://ultimaker.com/en/resources/52606-check-for-play-on-the-axles|Check for play on axles]]
   * [[https://ultimaker.com/en/resources/52607-check-the-tension-of-the-short-belts|Check tension of short belts]]   * [[https://ultimaker.com/en/resources/52607-check-the-tension-of-the-short-belts|Check tension of short belts]]
   * [[https://ultimaker.com/en/resources/52609-check-for-debris-in-the-front-fan-of-the-print-head|Check for residue in front fan of print head]]   * [[https://ultimaker.com/en/resources/52609-check-for-debris-in-the-front-fan-of-the-print-head|Check for residue in front fan of print head]]
  • ultimaker_s5/ultimaker_s5.1569242442.txt.gz
  • Last modified: 2019/09/23 05:40
  • by formlab