ultimaker_s5:ultimaker_s5

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
ultimaker_s5:ultimaker_s5 [2019/06/05 04:47] – created formlabultimaker_s5:ultimaker_s5 [2020/06/23 04:11] (current) formlab
Line 1: Line 1:
 ====== Ultimaker S5 ====== ====== Ultimaker S5 ======
 {{:ultimaker_s5:ultimaker-s5.jpg?nolink&200|}} {{:ultimaker_s5:ultimaker-s5.jpg?nolink&200|}}
 +
 +
 +  * Max Build Volume: ''330 x 240 x 300mm''
 +  * [[:Filament options]]
 +
 +
 +[[:How much does FDM printing cost?]]
 +
 +
 +----
 +
 +===== Maintenance =====
 +==== Every 2 months ====
 +  * [[https://ultimaker.com/en/resources/52604-clean-the-printer|Clean printer]]
 +    * wash build plate with warm water
 +    * heat up nozzles to 150°C and remove plastic stuck on the nozzle (with tweezers or a paper towel)
 +    * clean Bowden tube by pushing a piece of sponge trough. Tight fit, and a new piece of sponge per tube.
 +  * [[https://ultimaker.com/en/resources/52605-lubricate-the-axles|Lubricate axles]]
 +    * clean all smooth axles with a paper towel
 +    * one drop of Unilube on all smooth axles (also the two vertical ones). Move the print head and bed manually to distribute.
 +
 +
 +==== Every 6 months ====
 +  * [[https://ultimaker.com/en/resources/52606-check-for-play-on-the-axles|Check for play on axles]]
 +  * [[https://ultimaker.com/en/resources/52607-check-the-tension-of-the-short-belts|Check tension of short belts]]
 +  * [[https://ultimaker.com/en/resources/52609-check-for-debris-in-the-front-fan-of-the-print-head|Check for residue in front fan of print head]]
 +  * [[https://ultimaker.com/en/resources/52611-check-the-quality-of-the-nozzle-cover|Check quality of silicone nozzle cover]]
 +  * [[https://ultimaker.com/en/resources/52614-clean-the-print-cores|Clean print cores]]
 +  * [[https://ultimaker.com/en/resources/52613-clean-the-feeders|Clean the feeders]]
 +  * [[https://ultimaker.com/en/resources/52612-lubricate-the-z-screw-of-the-z-motor|Lubricate lead screw Z motor]]
 +==== Yearly ====
 +
 +  * [[https://ultimaker.com/en/resources/52615-lubricate-the-feeder-gear|Lubricate the feeder gear]]
 +  * [[https://ultimaker.com/en/resources/52616-replace-the-bowden-tubes|Replace Bowden tubes]]
 +  * [[https://ultimaker.com/en/resources/52617-clean-the-system-fans|Clean the system fans]]
 +  * [[https://ultimaker.com/en/resources/52618-lubricate-the-hinges|Lubricate the hinges]]
  • ultimaker_s5/ultimaker_s5.1559735230.txt.gz
  • Last modified: 2019/06/05 04:47
  • by formlab