Show pagesourceOld revisionsBacklinksBack to top Table of Contents Ultimaker 3 Extended Maintenance Monthly Every 6 months Yearly This is an old revision of the document! Ultimaker 3 Extended Maintenance Monthly Clean printer Lubricate axles Every 6 months Check for play on axles Check tension of short belts Check for residue in front fan of print head Check quality of silicone nozzle cover Clean print cores Lubricate lead screw Z motor Yearly Clean feeders Replace Bowden tubes ultimaker_3_extended/ultimaker_3_extended.1569229872.txt.gz Last modified: 2019/09/23 02:11by formlab
