projet_mjp_3600:projet_mjp_3600

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
projet_mjp_3600:projet_mjp_3600 [2019/06/04 01:24]
formlab created
projet_mjp_3600:projet_mjp_3600 [2020/09/09 01:22] (current)
formlab
Line 1: Line 1:
-====== Projet MJO 3600 ====== +====== Projet MJP 3600 ====== 
-{{:projet_mjp_3600:pj3600_angle01-940_tn_web.png?nolink|}}+{{:projet_mjp_3600:pj3600_angle01-940_tn_web.png?nolink&200|}} 
 + 
 +Multijetting 3D printer 
 + 
 +  * Max Build Volume: ''298 x 183 x 203mm'' 
 + 
 +---- 
 + 
 +=== How much does it cost? === 
 + 
 +<code> 
 +( build material cost + support material cost ) * material multiplier ) 
 +  + 
 +( machine time (in hours) * machine time cost ) 
 +</code> 
 + 
 +  * Build material cost: €515,70 per 2Kg 
 +  * Support material cost: €279,72 per 2Kg 
 +  * Material multiplier: 10% (build and support material * 1,1) 
 +  * Machine time cost: €0,55 per hour 
 + 
 + 
 +=== Design constraints === 
 +  * A hollow model needs a hole for the support material to drain out. Without a hole, the software will fill the space with building material 
 + 
 +=== Post production === 
 +  * Degrease object with IPA to increase adhesion for paint 
 +  * Use a primer for UV protection 
 +  * Spray paint 
 +  * Colouring the volume of the object: immerse into a mixture of acetone (30%), water (70%) and fabric paint (experimental)
  • projet_mjp_3600/projet_mjp_3600.1559636697.txt.gz
  • Last modified: 2019/06/04 01:24
  • by formlab