Differences

This shows you the differences between two versions of the page.

--- projet_mjp_3600:projet_mjp_3600 [2020/05/25 01:55] – formlab
+++ projet_mjp_3600:projet_mjp_3600 [2020/09/09 01:19] – formlab
@@ Line 2: / Line 2: @@
 {{:projet_mjp_3600:pj3600_angle01-940_tn_web.png?nolink&200|}}
-===== How much does it cost? =====
+Multijetting 3D printer
+  * Max Build Volume: ''298 x 183 x 203mm''
+----
+=== How much does it cost? ===
 <code>
 ( build material cost + support material cost ) * material multiplier )
   +
-( machine time (in hours) * machine time cost )
+( machine time (in hours) * machine time multiplier )
 </code>
- * build material cost: €515,70 per 2Kg
+  * Build material cost: €515,70 per 2Kg
- * support material cost: €279,72 per 2Kg
+  * Support material cost: €279,72 per 2Kg
- * material multiplier: 10% (build and support material * 1,1)
+  * Material multiplier: 10% (build and support material * 1,1)
- * machine time multiplier: €0,55 per hour
+  * Machine time multiplier: €0,55 per hour
+=== Design constraints ===
+  * A hollow model needs a hole for the support material to drain out. Without a hole, the software will fill the space with building material
----
+=== Post production ===
+  * Degrease object with IPA to increase adhesion for paint
+  * Use a primer for UV protection
+  * Spray paint
+  * Colouring the volume of the object: immerse into a mixture of acetone (30%), water (70%) and fabric paint (experimental)