Differences

This shows you the differences between two versions of the page.

--- other:other [2021/06/21 03:57] – formlab
+++ other:other [2024/05/13 00:57] (current) – [Website] formlab
@@ Line 7: / Line 7: @@
   * [[other:3D printing a single line]]
   * [[https://www.youtube.com/watch?v=9AaujAPghhE|Casting aluminum from a 3D print]]
+  * [[other:Raspberry Pi video looper]]
+===== Web-Print =====
-{{:other:3d_print_sanded.jpg?nolink|}}
+  * [[https://hogent.mynetpay.be/?view=easyprintgo|hogent.mynetpay.be]]
-Sanding 3D prints makes it appear matte
+  * Log in
+  * Kies zwart-wit of kleur (EDU of ADM maakt niet uit)
+  * Upload het bestand
+  * Ga naar de afdeling grafiek (verdieping 3)
+  * Leg KASK-kaart op de printer
+  * Selecteer je budget. Privé of ART1
+  * Klik op ''Secure print''
+  * Selecteer je file
+  * Klik 'print'.
-Assortments
+===== Website =====
+Formlab - Grav website CMS system
+  * Main page: blog
+  * child pages: item
+===== Occulus Go =====
+standalone VR goggles
+Troubleshooting:
+When controller doesn't want to connect, do a factory reset:
+- Press power and volume-down button
+- Navigate to the factory reset option with the volume buttons
+- press OK with the power button
+===== Assortments =====
   * Hex socket cap bolts ([[https://docs.rs-online.com/b3b9/0900766b815834db.pdf|RS-components - 545 Piece stainless steel bolt kit]])
     * M3 x 6, 8, 12
@@ Line 33: / Line 63: @@
     * M10
+===== Join shared folder on Windows =====
+  * Open new explorer window
+  * Right-click on 'This PC'
+  * Click on ''Map Network Drive...''
+  * in 'Folder', write: \\IP-address-of-mac\shared-folder-name
+  * Enter the username and password the shared folder is connected to
+===== Lumix GH5S Remote shutter release:=====
+[[https://www.norwegiancreations.com/2018/07/controlling-a-camera-shutter-remotely-with-an-arduino/]]\\
+I used this circuit with the 4N25 optocoupler: [[http://wei48221.blogspot.com/2016/06/how-to-use-4n25-optocoupler_27.html]]
+{{:utilities:trigger-circuit.jpg?nolink&800|}}
+To use this with a 3.3V trigger signal, the resistor going to input 1 on the optocoupler should be around 50Ω.