isel_icv4030:isel_icv4030

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
isel_icv4030:isel_icv4030 [2019/06/05 04:42] formlabisel_icv4030:isel_icv4030 [2023/05/10 05:55] (current) – [Available material] formlab
Line 1: Line 1:
-====== Isel ICV 4030 ====== +====== Isel ICV 4030 - CNC milling machine ======
-Milling machine+
 {{:isel_icv4030:isel_icv_4030.jpg?nolink&200|}} {{:isel_icv4030:isel_icv_4030.jpg?nolink&200|}}
  
-* [[Milling PCB's]]+ 
 +  * Max Model Dimensions (X - Y): ''29 x 35cm'' 
 + 
 +---- 
 + 
 +  * [[Milling PCB's]] 
 +  * [[isel_icv4030:Engraving large pockets]] 
 +  * [[isel_icv4030:Engraving detailed images]] 
 + 
 +---- 
 + 
 +===== What does it cost? ===== 
 + 
 +  ( item cost * item count or item length (in centimeters) * material multiplier ) 
 +  + 
 +  ( machine time (hours) * machine multiplier ) 
 + 
 + * item count or item length: sheet items are counted per piece. Rectangular or square bars are counted per centimeter 
 +  * material multiplier: item cost * item count * 2 (included in the table below) 
 +  * machine time multiplier: 
 +    * For projects under 2 hours: €7 per hour 
 +    * For projects over 2 hours and under 5 hours: €6,5 per hour 
 +    * For projects over 5 hours: €6 per hour 
 + 
 +---- 
 + 
 +{{:isel_icv4030:materials-aluminum.jpg|}} 
 +===== Available material ===== 
 + 
 +^ Material ^ Dimensions ^ Cost ^ 
 +| Aluminum plate | 280x140x8mm | €9,20 per piece | 
 +| Aluminum plate | 300x260x5mm | €10,60 per piece | 
 +| square bar | 20x20mm | €0,20 per cm | 
 +| square bar | 40x40mm | €0,40 per cm | 
 +| square bar | 60x60mm | €0,80 per cm | 
 +| rectangular bar | 80x30mm | €0,80 per cm | 
 +| rectangular bar | 80x40mm | €1,00 per cm | 
 +| rectangular bar | 150x15mm | €0,80 per cm | 
 +| rectangular bar | 200x10mm | €0,60 per cm | 
 +| rectangular bar | 200x20mm | €1,20 per cm | 
 + 
 +---- 
 + 
 +=== Aluminum === 
 +Tested alloy: 6082 / ALMgSi1 
 +[[https://testas.be/|Testas]]: [[https://mcbgroup.eu/app/uploads/sites/2/2018/01/DS31-6082-gewalst.pdf|data sheet]] 
 + 
 +=== Messing === 
 +Tested alloy: CuZn 37 
 + 
 +===== Milling tips ===== 
 +  * Foam 
 +    * single flute 
 +    * down cut 
 +    * 3000mm/min and 18-24,000rpm depending on bit diameter 
 +    * use conventional milling 
  • isel_icv4030/isel_icv4030.1559734966.txt.gz
  • Last modified: 2019/06/05 04:42
  • by formlab