Differences

This shows you the differences between two versions of the page.

--- isel_icv4030:isel_icv4030 [2020/06/23 04:31] – formlab
+++ isel_icv4030:isel_icv4030 [2023/05/10 05:52] – [What does it cost?] formlab
@@ Line 9: / Line 9: @@
   * [[Milling PCB's]]
   * [[isel_icv4030:Engraving large pockets]]
+  * [[isel_icv4030:Engraving detailed images]]
 ----
+===== What does it cost? =====
-=== What does it cost? ===
+  ( item cost * item count or item length (in centimeters) * material multiplier )
-<code>
-( item cost * item count or item length (in centimeters) * material multiplier )
   +
-( machine time (hours) * machine multiplier )
+  ( machine time (hours) * machine multiplier )
-</code>
+ * item count or item length: sheet items are counted per piece. Rectangular or square bars are counted per centimeter
-  * item count or item length: sheet items are counted per piece. Rectangular or square bars are counted per centimeter
+  * material multiplier: item cost * item count * 2 (included in the table below)
-  * material multiplier: 50%: item cost * item count * 1,5
+  * machine time multiplier:
-  * machine multiplier: €5 per hour
+    * For projects under 2 hours: €7 per hour
+    * For projects over 2 hours and under 5 hours: €6,5 per hour
+    * For projects over 5 hours: €6 per hour
 ----
-==== Available material ====
-^ Material ^ Dimensions ^ Cost
+{{:isel_icv4030:materials-aluminum.jpg|}}
-| Aluminum plate | 280x140x8mm | €4,53 per piece |
+===== Available material =====
-| Aluminum plate | 300x260x5mm | €5,260 per piece |
-| square bar | 20x20mm | €0,041 per cm |
+^ Material ^ Dimensions ^ Cost ^
-| square bar | 40x40mm | €0,162 per cm |
+| Aluminum plate | 280x140x8mm | €6,90 per piece |
-| square bar | 60x60mm | €0,366 per cm |
+| Aluminum plate | 300x260x5mm | €7,95 per piece |
-| rectangular bar | 80x30mm | €0,325 per cm |
+| square bar | 20x20mm | €0,15 per cm |
-| rectangular bar | 80x40mm | €0,430 per cm |
+| square bar | 40x40mm | €0,30 per cm |
-| rectangular bar | 150x15mm | €0,305 per cm |
+| square bar | 60x60mm | €0,60 per cm |
-| rectangular bar | 200x10mm | €0,275 per cm |
+| rectangular bar | 80x30mm | €0,60 per cm |
-| rectangular bar | 200x20mm | €0,540 per cm |
+| rectangular bar | 80x40mm | €0,75 per cm |
+| rectangular bar | 150x15mm | €0,60 per cm |
+| rectangular bar | 200x10mm | €0,45 per cm |
+| rectangular bar | 200x20mm | €0,90 per cm |
+----
+=== Aluminum ===
+Tested alloy: 6082 / ALMgSi1
+[[https://testas.be/|Testas]]: [[https://mcbgroup.eu/app/uploads/sites/2/2018/01/DS31-6082-gewalst.pdf|data sheet]]
+=== Messing ===
+Tested alloy: CuZn 37
+===== Milling tips =====
+  * Foam
+    * single flute
+    * down cut
+    * 3000mm/min and 18-24,000rpm depending on bit diameter
+    * use conventional milling