Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== EMO-25 ====== * 25cc. * pastes, gels, liquids. * Nozzle sizes: 1.0, 1.5, 2.0mm (and Luer adaptor needles) * results are not edible. * Official info: http://hyrel3d.net/wiki/index.php/EMO * Toolchange for bigger prints: Press the big pause-button and remove the tool head. When changing the tube, use the presetter tool to make sure the new tube has the same nozzle offset then the previous one. hyrel/emo-25.txt Last modified: 2020/10/13 06:50by formlab