Table of Contents
Isel ICV 4030 - CNC milling machine
- Max Model Dimensions (X - Y):
29 x 35cm
What does it cost?
( item cost * item count or item length (in centimeters) * material multiplier ) + ( machine time (hours) * machine multiplier )
* item count or item length: sheet items are counted per piece. Rectangular or square bars are counted per centimeter
- material multiplier: item cost * item count * 2 (included in the table below)
- machine time multiplier:
- For projects under 2 hours: €7 per hour
- For projects over 2 hours and under 5 hours: €6,5 per hour
- For projects over 5 hours: €6 per hour
Available material
| Material | Dimensions | Cost |
|---|---|---|
| Aluminum plate | 280x140x8mm | €9,20 per piece |
| Aluminum plate | 300x260x5mm | €10,60 per piece |
| square bar | 20x20mm | €0,20 per cm |
| square bar | 40x40mm | €0,40 per cm |
| square bar | 60x60mm | €0,80 per cm |
| rectangular bar | 80x30mm | €0,80 per cm |
| rectangular bar | 80x40mm | €1,00 per cm |
| rectangular bar | 150x15mm | €0,80 per cm |
| rectangular bar | 200x10mm | €0,60 per cm |
| rectangular bar | 200x20mm | €1,20 per cm |
Aluminum
Tested alloy: 6082 / ALMgSi1 Testas: data sheet
Messing
Tested alloy: CuZn 37
Milling tips
- Foam
- single flute
- down cut
- 3000mm/min and 18-24,000rpm depending on bit diameter
- use conventional milling