====== Isel ICV 4030 - CNC milling machine ======
{{:isel_icv4030:isel_icv_4030.jpg?nolink&200|}}


  * Max Model Dimensions (X - Y): ''29 x 35cm''

----

  * [[Milling PCB's]]
  * [[isel_icv4030:Engraving large pockets]]
  * [[isel_icv4030:Engraving detailed images]]

----

===== What does it cost? =====

  ( item cost * item count or item length (in centimeters) * material multiplier )
  +
  ( machine time (hours) * machine multiplier )

 * item count or item length: sheet items are counted per piece. Rectangular or square bars are counted per centimeter
  * material multiplier: item cost * item count * 2 (included in the table below)
  * machine time multiplier:
    * For projects under 2 hours: €7 per hour
    * For projects over 2 hours and under 5 hours: €6,5 per hour
    * For projects over 5 hours: €6 per hour

----

{{:isel_icv4030:materials-aluminum.jpg|}}
===== Available material =====

^ Material ^ Dimensions ^ Cost ^
| Aluminum plate | 280x140x8mm | €9,20 per piece |
| Aluminum plate | 300x260x5mm | €10,60 per piece |
| square bar | 20x20mm | €0,20 per cm |
| square bar | 40x40mm | €0,40 per cm |
| square bar | 60x60mm | €0,80 per cm |
| rectangular bar | 80x30mm | €0,80 per cm |
| rectangular bar | 80x40mm | €1,00 per cm |
| rectangular bar | 150x15mm | €0,80 per cm |
| rectangular bar | 200x10mm | €0,60 per cm |
| rectangular bar | 200x20mm | €1,20 per cm |

----

=== Aluminum ===
Tested alloy: 6082 / ALMgSi1
[[https://testas.be/|Testas]]: [[https://mcbgroup.eu/app/uploads/sites/2/2018/01/DS31-6082-gewalst.pdf|data sheet]]

=== Messing ===
Tested alloy: CuZn 37

===== Milling tips =====
  * Foam
    * single flute
    * down cut
    * 3000mm/min and 18-24,000rpm depending on bit diameter
    * use conventional milling