Differences

This shows you the differences between two versions of the page.

--- projet_mjp_3600:projet_mjp_3600 [2020/05/25 03:02] – formlab
+++ projet_mjp_3600:projet_mjp_3600 [2020/07/14 03:31] – [How much does it cost?] formlab
@@ Line 16: / Line 16: @@
 </code>
-  * build material cost: €515,70 per 2Kg
+  * Build material cost: €515,70 per 2Kg
-  * support material cost: €279,72 per 2Kg
+  * Support material cost: €279,72 per 2Kg
-  * material multiplier: 10% (build and support material * 1,1)
+  * Material multiplier: 10% (build and support material * 1,1)
-  * machine time multiplier: €0,55 per hour
+  * Machine time multiplier: €0,55 per hour
+=== Design constraints ===
+  * A hollow model needs a hole for the support material to drain out. Without a hole, the software will fill the space with building material
+Post production
+  * Degrease object with IPA to increase adhesion for paint
+  * Use a primer for UV protection
+  * Spray paint
+  * Colouring the volume of the object: immerse into a mixture of acetone (30%), water (70%) and fabric paint (experimental)